سقالات جايكو

نظرة عامة على المنظمة

مصنع الجزيرة للانشاءات الهندسية (جايكو) تخدم احتياجات السقالات مع مواد ذات جودة عالية و المنتجات المطلوبة لصناعة البناء. يتم التصميم حسب المعاير وكذلك حسب الطلب و الحلول التي تتلاءم مع الاجراءات التي تلبي احتياجات العملاء .

لدينا فريق متفوق في مهنتهم في المؤهلات والخبرة الفنية وفي مجال السقالات و القوالب. نركز على التعلم من التجارب السابقة، واستكشاف أفكار جديدة في السوق ونتبنى التقنيات الجديدة في المجال الذي يسمح لفريقنا توفير لكم مواد ذات جودة و خدمة ممتازة نحن نتبنى سياسة ضمان الجودة لا هوادة فيها لضمان أفضل جودة للمنتج.
هذا النهج هو ضمان أقصى قدر من القوة والمتانة للمنتجات من جايكو اليوم، ونحن على النمو وديناميكية التوريد السقالات وقوالب المؤقتة للمواد داخل المملكة العربية السعودية التزامنا "السعي للمضي قدمًا" سيكون دائمًا لدينا المبادئ التوجيهية الساطعة وسنبذل قصارى جهدنا دائما لمواصلة جهودنا إﻧﻧﺎ ﻧﺗطﻟﻊ إﻟﯽ ﺗﺄﮐﯾد ﻣﻧﺗﺟﺎﺗﻧﺎ اﻟﺟﯾدة و خدمات عالية الجودة لك في المستقبل القريب.

منتجاتنا

- مواسير السقالات:

JAECO supplies galvanized scaffolding tubes and black scaffolding tubes confirming to BS 1139/EN 10219 in compliance with latest ARAMCO GI 8.001.

مواسير السقالات المجلفنة والعادية

Properties BS 1139 SI FPS
Wall thickness 3 mm 0.118 inch
Nominal OD 48.3 mm 1.901 inch
Sectional Area 427 mm2 0.662 inch2
Moment of Inertia 0.1099x 10^6 mm4 0.264 inch4
Section Modulus 4551 mm3 0.28 inch3
Radius of Gyration 16.04 mm 0.63 inch
Minimum Yield Stress 235N/mm2 34ksi
Properties BS 1139 SI FPS
Wall thickness 4 mm 0.158 inch
Nominal OD 48.3 mm 1.901 inch
Sectional Area 557 mm2 0.862 inch2
Moment of Inertia 0.1376 x 10^6 mm4 0.33 inch4
Section Modulus 5700 mm3 0.35 inch3
Radius of Gyration 15.7 mm 0.62 inch
Minimum Yield Stress 235N/mm2 34ksi
Properties EN 10219 SI FPS
Wall thickness 3.2 mm 0.125 inch
Nominal OD 48.3 mm 1.901 inch
Sectional Area 453 mm2 0.702 inch2
Moment of Inertia 0.115 x 10^6 mm4 0.28 inch4
Section Modulus 4797 mm3 0.29 inch3
Radius of Gyration 16.0 mm 0.63 inch
Minimum Yield Stress 320 N/mm2 46 ksi

- الواح السقالات LVL:

JAECO supplies scaff olding boards in accordance with BS 5973 or equivalent AS/ NZS 4357/ EN 14374:1995 and ANSI A10.8-2001. Each Scaff olding Board is individually proof tested, laminated and embossed with PROOF TESTED SCAFFOLD PLANK and OSHA to comply with latest ARAMCO GI 8.001.

- السلالم الحديدية:

LADDER BEAMS AND LADDER SQUARE Ladder beams are made for a clear span between scaff olds. Its are constructed from high tensile steel and the saddles are welded at each joint for better security.
You can get a painted or galvanized fi nishing and available in diff erent lengths and weights.

Available Sizes
Thikness(mm) Size (m)
3.0mm 6m
4m
3m
3.2mm 6m
4m
3m

- كلبسات الربط للسقالات:

كلبس ثابت مجلفن

Weight – 0.965 kg
Max. Slip Load – 15 KN
Max. Distortion Load – 30 KN
Finish – Zinc Plated
Max. Displacement – 7 mm
Fully conforms to standard EN 74

كلبس متحرك مجلفن

Weight – 1.071 kg
Max. Slip Load – 8.5 KN
Max. Distortion Load – 17 KN
Finish – Zinc Plated
Max. Displacement – 7 mm
Fully conforms to standard EN 74

كلبس بتلك

Weight – 0.570 kg
Max. Slip Load – 12 KN
Finish – Zinc Plated
Fully conforms to BS 1139

كلبس كمر حديد مجلفن

Weight – 1.42 kg
Slip of Coupler along Section Load – 10 KN
Slip of tube through Coupler – 6.5 KN
Finish – Zinc Plated
Hanging Load Vertically – 30 KN
Always use in pairs
Fully conforms to standard EN 74

كلبس مواسير-مشترك

Weight – 1 kg
Max. Slip Load – 6 KN
Max. Bending Load – 19 KN
Max. Displacement – 2 mm
Finish – Zinc Plated
Fully conforms to EN 74

وصلة مواسير-مشترك

Weight – 820 g
Max. Slip Load – 6 KN
Max. Bending Load – 19 KN
Fully conforms to standard EN 74

كلبس ماسورة سقالة مع خشب LVL

Weight – 382 g
Finish – Zinc Plated
Fully conforms to standard EN 74

فراشة LVL كلبس خشب

The BRC is used with scaff olding in order to secure scaff olding boards. BRC ensures that scaff olding boards are carefully and safely locked in to the correct position for a safe work environment.
Finish – Zinc Plated Fully Conforms to EN 74.

كلبس سلم

This is a unique safety product that enables a ladder to be fi rmly fastened by the stiles to the horizontal scaff old tubes or posts. These are always used in pairs.
Fully conforms to standard EN 74

كلبس كمر المونيوم متحرك - مجلفن

Performs a similar function to the wedge clamps but recommended where forms are to be handled repeatedly or are likely to be subjected to considerable vibration.
Fully conforms to standard EN 74

كلبس ماسورة سقالة ثابت - خفيف

Dimention: 48 x 48 mm
weight: 690gm
Finish: Pressed

كلبس ماسورة سقالة متحرك - خفيف

Dimention: 48 x 48 mm
weight: 700gm
Finish: Pressed

- نظام جايكو لسقالات الكب لوك:

CUPLOCK BENEFITS
  • Strong – 40kN per leg.
  • Saving in erection times, fast to assemble.
  • Simple to erect.
  • Systemized bracing reduces labour costs.
  • Full Design support with C.A.D.
  • Components up to 20% lighter than traditional counterparts.
  • Versatile for Support and access.
  • Confidence from in depth technical support.
حلول هندسية لنظام الكب لوك

The principal feature of JAECO Cup lock is the unique method of connecting ledgers and transoms to the standards in one single action without the use of nuts, bolts or wedges.

The Locking device is formed by two cups, a fixed lower cup which is welded to the standard at 0.5m intervals and a sliding upper cup. The forged blade ends of ledgers are located in the lower cup. The upper cup is moved down and rotated by hammer blows to give a positive and rigid connection.

It is this revolution node point locking principle which helps to make JAECO Cuplock faster to erect than other scaffolding systems. Since ledgers are located in node points on one level, setting out is easy and complete erection simplicity itself.

CONFIDENCE – CAD SUPPORT

Our experience of using cuplock in virtually every type of project in K.S.A enables us to offer you absolute confidence when using the system. Our extensive technical and design support includes an advanced computer aided design facility. With cuplock we provide simply the best technical support available.

القوائم الرأسية لنظام الكب لوك

Standards (Vertical posts) have top and bottom cups at every 500mm. They can be manufactured from 1.0m to 3.0m in length.

العوارض الأفقية لنظام الكب لوك

Ledgers are provided with forged blade ends to enable positive locking and are available in range of different sizes.

عارضة متوسطة للأخشاب

Intermediate Transoms provides board or bottom support where ever there is no ordinary transom present, i.e. between the standards.

- اكسسوارات نظام سقالات الكب لوك:

مسنن متحرك بدون قاعدة (ميزانية)

The Universal Jack can be connected at either end of the standard and used with the socket base or fork head. The threaded tube makes make height adjustments easy. It provides an adjustment option at either the top or the lowest end of scaffolding support structure.

مسنن ميزانية أرضي

The adjustable base jack can be used as an alternative to the universal jack and socket base. It fits underneath the standard and can be adjusted to accommodate different surface levels. The base jack can be plated or painted.

مسنن ميزانية علوي

The adjustable U-head can be connected at the top of the standard and has a U Head on top to support primary and secondary aluminium beams or decking beams for formworks.

Hميزانية علوية للأخشاب 20

The adjustable fork head can be connected at the top of the standard and has a U-Head on top to support primary and secondary aluminium beams or decking beams for formworks.

عجل متحرك

Heavy duty wheel exclusively used with twist lock, Cuplock system. This can carry a static load of 800kg.

وصلة دائرية القطر للقوائم

Spigots are used on the top of a standard to create an end to end connection with another standard. The spigots can be welded or be supplied loose with the nuts and the bolts, So they can be connected onto the top of the standard.

وصلة مربعة القطر للقوائم

Spigots are used on the top of a standard to create an end to end connection with another standard. The spigots can be welded or be supplied loose with the nuts and the bolts, So they can be connected onto the top of the standard.

عارضة خارجية للسقالات (كابولي)

Cantilever Frames are used for providing support to decking or formwork at edges. The frame has ledger blades connected, So it can be fi tted onto cups of the standards. The frame can also accept jacks in three positions at the other end at 1.2m, 1.25m,and 1.3m from centerline of the standard.
Cantilever frames are designed with blade ends that can be easily located in the cup joint.

قائم رأسي حامل للكمر الساقط

Beam Brackets are used to support the drop beams engaged within the regular slab support grid.
This eliminates the need for the beam bottoms to be propped up from the ground. The Beam Brackets are capable of receiving adjustable jacks and standards for reaching the beam bottom level. It has a safe load carrying capacity of 20KN.

- كمرات ألمونيوم:

Aluminium Beam is the product of careful research and development. It is indeed a most versatile shoring member covering the vast majority of building applications. The four beams currently available are designed to perform specifi c jobs for the most economical solutions. Other systems where only a single section is available, could result in compromises being made with regard to design that adversely aff ect labour and material costs and reduce profi ts in an ever competitive market place.
JAECO Aluminium Beams are ideal for use as primary and secondary members on soft formwork and equally suitable as walling on wall formwork in conjunction with JAECO’s robust Steel Soldier System. Provision is made at the top for a solid timber insert to allow plywood to be fi xed easily and ensures tighter joints for greater safety and speed on accuracy on site.


Available sizes
Thikness(mm) Size (M)
4mm 6m
5m
4m
2m
3.2mm 6m
5m
4m
2m

كمر خشب H-20 للأسقف


Available sizes (m)
5.9m
4.9m
3.9m
2.9m

- ACCESS SCAFFOLD FRAMES:

نظام سقالات برواز جايكو:



- البرواز الكوري:


- القواطع والفواصل الحديدية لقوالب الخرسانة:

F Profile Plywood Formwork Panel
Normal Length: 900, 1200, 1500, 1800mm.
Normal Width: 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600mm.

- GALVANIZED PROPS:

دعائم حديدية للأسقف والجدران

(Light Duty- 2.0 mm Inner & 2.0 mm Outer tube) JAECO props designed in keeping with British standards, these adjustable props/struts are of high grade steel. They are ideal for any type of construction requiring adjustable load bearing. Rough height adjustment is made possible by way of a heavy duty steel pin inserted into a slot in the outer tubular steel body through one of the best suited holes (in terms of off ering the approx. height extension) in the inner heavy duty tube. Precision adjustment of height is aff ected by a lever attached to a cast iron collar located just below the pin.

PROPS

Inner Tube Dia: 48mm Outer Tube Dia:60mm .

PUSH PULL PROPS

(Versatile Light Weight Time Saving) Push-Pull Props are designed for use wherever an adjustable inclined strut is required. The push prop is generally used in the construction/erection of pre-cast units and plumbing of column and wall formwork. However, they are also suitable for other industrial applications.These Props are Available in a wide range of sizes.

- قوالب الخرسانة للجدران والأعمدة:

Formwork with frame is made of steel and plywood as the board, it suits for any, horizontal structure.i.e. walls, columns, pillars, abutments and foundations.


حلول القوالب الخرسانية

  • Concrete surface fi nishing is the same smooth as plywood formwork.
  • Steel frame formwork has longer lifetime than plywood.
  • Save working time. Everything has been already made in the factory.
  • Can be recycle, reduce the waste and contamination to the environment.

الواح خشب بلايود

Film: Dynea or Stora-Enso dark brown, black(Other color as request).
Core: Poplar, Hardwood, Eucalyptus, Birch, Combi, Pine.
Glue: WBP (water-proof), MR, Melamine.
Size: 1220x2440, 1250x2500, 1220x2500, 915x1830, 1500x3000, 1525x3050 (mm).
Thickness: 6, 9, 12, 15, 18, 21, 24, 25, 27, 30, 35 (mm).
Number of layers: 5-21 depending on thickness
Moisture Content: 8-12%

Density
Item Approx. kg/m3
Poplar 530
Hardwood 635
Combined 600
Birch 690
Pine 700

مكونات اكسسوارات قوالب الخرسانة

Wing-Nut
Wing Nut
Waler-Plate
Waler Plate
Water-Barrier-Without-Disc
Water Barrier Without Disc
Water-Barrier-With-Disc
Water Barrier With Disc
Tie-Rod-Dtwudag
Tie Rod Dtwudag
Indian-Tierod
Indian Tierod
Plastic-Pipe
Plastic Pipe
Plastic-Cones
Plastic Cones
Rapid-Clamp
Rapid Clamp
Plastic-Cones
C-CLAMP

حلول السقالات والدعائم الحديدية للبناء

Access Scaffolding
Slab/Beam Support with-H20

Independent Access Scaffolding
Mobile Tower Scaffolding